Valeton GP-200

I have been playing for 46 years now which means that classic 100 W tube amplifiers and a couple of 4 x 12" cabs are history for me now. Så... I have been through Line 6 pods, Line 6 Helix floorboard, Hotone Ampero, H&K Tubemeister 40, H&K Black Spirit 200 and a lot in between.
Even the expensive Helix Floorboard always seemed to be "Close but no cigar" and after giving it a lot of attention I mastered every little detail of what it could offer - and it was a lot in terms of functionality. But even though I was pretty good at programminig it I never had this big smile from sound playing live.
So I decided to try the Valeton even though I knew that it is made by Hotone - AND the Hotone Ampero was a complete disaster for me.

To be very short: The GP-200 does not have all the fancy connections as the Helix BUT it has exactly what I need for studio and live use. Nothing less and noting more. And the sound is absolutely hitting me right where it feels the best. Still I had to use some of the Ownhammer IR's that I tried to use in the Helix - it made the sound a little different - not much better than the factory cabs. And again the factory cabs can be picked automaticly when you choose an amp and generally everything sound VERY VERY good. The built in patches are really well made but of cause Valeton had to make some weird spacial / alien sounds as well.
The programming is not the most intuitive and the manual sucks but hey... it is not an Apollo 2421 spaceship so just play with it and you will master it quickly -the computer software however is helpfull to a certain degree but th UI is definately not up to US or EU standards but clearly chinese. But it gets the job done when you figure out what strange brain programmed the software :o)
Overall it has everything you need to go an any gig you can imagine. 2 sets of stereo outputs gives you a balanced signal to FOH and a stereo signal to your personal, active monitors. The output signal is not the most powerful and in some occations I need more output signal from the balanced out to the FOH. The Ampero had the same but the output on my unit was so low that it made the unit unusable....

So - if you are looking for a small, cheap board the can faithfully reproduce som of the classic amps AND their personal characteristics - this is the one to try. I have had all the classic tubeamps and this gets SO close that I sometimes forget that I am not playing on my JVM410, Mesa Boogie, ENGL or any of the others that made me happy when I was strong enough to carry them.
Just remember that your guitar and playing style will change the sound. Fortunately there are plenty of patches to fill so you can just have a bank or two for every guitar you bring to the gig !!!

Valeton GP200 amp modeler on a budget

Pro's :
- Very stirdy build metalcase and pedal and clever connections (even USB-C and seperate midi in out plus xlr L/R and jack L/R outputs thumbs up for that
- The amps and stock cabs are very good with great dynamics and with a good IR added (you can load enough of them in the unit ) absolute great sounding
- The Wahs, boosts ,drives and modulation "pedals" are also very usefull
- Operation is breeze ,the pc editor is just very good

Con's :
The delay section definitely needs a firmware upgrade, mostly missing afilter section (a lo pass filter would be great addition) and only one delay is stereo (ping pong) the others are weak and bearely usable since they sit behind you own sound ( IMHO)
Reverb is usable but nothing special
Pitchshift just sucks big time
a lot of the fx are missing a dry/wet mix parameter

So in short a very promising unit where future firmware updates could take it easy to subtop level (helix and others ) amps come very close to fractal feel so Valeton please go ahead with new firmware (including correcting the guiding text of the amps (where valeton now is calling them speakers ???) in the pc editor and beat the lot

I got this unit for rehearsal and practise use for my smaller amp. I already purchased Hotone Ampero but I was little disappointed because that unit has not the multi-use EXP pedal -> no possible to use EXP with volume and wah at the same time. That was quite odd to me... But in that case Valeton GP-200 is quite good alternative! Very solid made and sturdy metal case and the metallic foot buttons are high quality. There are 6-8 possible knobs to program and with external EXP/additional pedal you can get even more. I have tested that function with Hotone Ampero Switch 2-button and also Thomann own FS-2 button extra pedal, they worked fine with Valeton!

Pros :
+ very versatile and quite cheap multieffect
+ lots of features, amps, cabs, effects etc, I´d say well enough...
+ packaging was good and very informative leaflet inside
+ quite good editor after all and within that you can quite easily update firmwares
+ I think the editor software works also with older FW´s in the unit so they wouldn´t have to match each time?
+ you can program up to 6-8 or even more foot buttons with Hotone Ampero Switch or FS-2 type extra foot controller
+ the upper set of buttons are set higher so you cannot put the lower on by mistake
+ you can use the integrated EXP both volume and wah/switch them on/off in the same bank/preset

Cons :
- people might not know this brand at all so they might miss this product
- I think you cannot use so many MOD/FX effects at the same time, for example chorus and flanger at same time is impossible?
- the editor software might be quite challenging/hard if you have not used these kind of multieffects pedals
- if the bought power unit/adapter fails, I don´t know how you can get a new one?
- I am not so sure how long they keep updating this units FW or editor software updates, the next model might be already coming...